ISO/IEC 17025 Accredited Calibration Laboratory
Tescom Calibration Services is accredited by the ANSI National Accreditation Board (ANAB) to ISO/IEC 17025:2017 and ANSI/NCSL Z540-1-1994 (R2002) in the field of calibration. Certificate AC-1417 covers our Cedar Park lab and our San Antonio satellite lab.
What accreditation means for your certificates
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. ANAB accreditation means an independent assessor has verified our methods, our measurement uncertainty, our staff competence and our quality system.
For calibrations within our scope, your certificate includes:
-
As-found and as-left data
-
Measurement uncertainty
-
Traceability to NIST
-
The procedure used and the lab that performed the work
On-site calibration is available for many instruments. Some instruments get better results in our controlled lab, and we'll tell you which ones.
Accreditation at a glance
|
Accreditation body |
ANSI National Accreditation Board (ANAB) |
|
Standards |
ISO/IEC 17025:2017; ANSI/NCSL Z540-1-1994 (R2002) |
|
Field |
Calibration |
|
Certificate number |
AC-1417 |
|
Accredited organization |
Accredited Labs dba Tescom Calibration |
|
Main lab |
3317 El Salido Pkwy, Cedar Park, TX 78613 |
|
Satellite lab |
903 East Nakoma Dr., Suite 105, San Antonio, TX 78216 |
What our scope covers
|
Discipline |
Highlights of accredited range |
|---|---|
|
Electrical, DC and low frequency |
DC voltage to 1,100 V; DC high voltage to 60 kV; DC current to 100 A; clamp-on to 6,000 A; resistance, capacitance, inductance, AC voltage and current |
|
RF and microwave |
RF power, 9 kHz to 6 GHz |
|
Time and frequency |
Frequency measurement to 26.5 GHz; 10 MHz GPS-disciplined reference |
|
Dimensional |
Gage blocks, micrometers, calipers, height gages, indicators, ring and thread gages, levels, protractors |
|
Force |
Load cells and force measuring systems, 0.5 to 60,000 lbf |
|
Torque |
Torque tools, 4 ozf·in to 600 lbf·ft |
|
Pressure |
Gauge −15 to 20,000 psig; absolute 0.7 to 600 psia |
|
Mass |
Balances from 1 mg; scales 0.5 to 10,000 lb |
|
Temperature |
Probes and thermometers: −95 to 420 °C |
|
Humidity |
10 to 95% RH |
For the full list of parameters and ranges, download the current scope.
Ranges shown are highlights. The scope PDF is always the most current source.
Frequently Asked Questions
-
What is ISO/IEC 17025?
ISO/IEC 17025:2017 is the international standard for testing and calibration laboratories. It requires technical competence, valid methods, calculated measurement uncertainty and a working quality management system.
-
What is ANAB?
The ANSI National Accreditation Board is a US accreditation body. It assesses labs against ISO/IEC 17025 and is a signatory to the ILAC mutual recognition arrangement.
-
What is ANSI/NCSL Z540-1?
ANSI/NCSL Z540-1-1994 (R2002) is a US standard for calibration laboratories and measuring equipment. It is often required in aerospace and defense contracts.
-
How do I verify Tescom's accreditation?
Search for certificate AC-1417 in ANAB's directory at anab.org. The certificate is valid only together with the current scope.
-
How do I know if my instrument is covered?
Check the scope PDF, or send us your equipment list. We'll confirm how each instrument will be calibrated before we quote.
Request a Quote from Tescom Calibration Services
-
ISO/IEC 17025 accredited calibration laboratory
-
Reliable electronic and physical/dimensional calibration services with fast turnaround times
-
Nationwide mail-in calibration services, on-site in Cedar Park & San Antonio
-
Proudly providing quality calibration services since 1982